sector pages

Texas Instruments
- IC's (Integrated Circuits) [39]
- Amplifier [8]
- Comparator [34]
- Circuit Protection [1]
- Operational [97]
- Discrete Devices [7]
- Transistor, Bipolar [2]
- CMOS Logic [151]
- High-Speed [133]
- Bipolar Logic [43]
- Low-Power Schottky [125]
- BiCMOS Logic [11]
- Controller [7]
- CMOS Switch [1]
- Computational Interface / Peripherals [7]
- Linear Voltage Regulator [28]
- LDOs (Low Dropout) [38]
- Driver [33]
- Microcontroller [5]
- Microprocessor [11]
- Signal Conversion [1]
- Digital to Analog (D/A) [1]
- Analog to Digital (A/D) [19]
- Processor [27]
- Receiver [21]
- Transceiver [30]
- Timing Function (Timers) [8]

About company

Multivibrator, Monostable; CMOS; 20 mA; 20 mA; 25 mA; CDIP;

Manufacturer: Texas Instruments Description: Multivibrator, Monostable; CMOS; 20 mA; 20 mA; 25 mA; CDIP; -55 degC Retriggerable⁄resettable capability Triggering from the leading or trailing edge Separate re Dual retriggerable⁄resettable monostable precision multivibrators for fixed voltage timing applications. An external resistor (RX) and an external capacitor (CX) control the timing and the accuracy for the circuit. Adju

Inverter, Hex; Positive; 6 ns; 6 ns; PDIP-N; -40 degC; 85 de

Manufacturer: Texas Instruments Description: Inverter, Hex; Positive; 6 ns; 6 ns; PDIP-N; -40 degC; 85 degC Output can drive up to 10 LSTTL loads Low power consumption, 20-μA max Icc Typical tpd==8 ns

Flip-Flop; Dual D-Type Positive-Edge-Triggered Flip-Flops; 0

Manufacturer: Texas Instruments Description: Flip-Flop; Dual D-Type Positive-Edge-Triggered Flip-Flops; 0 to 5 V; PDIP Wide operating voltage range of 2 V to 6 V Outputs can drive up to 10 LSTTL loads Low power consumption, 20- The ’HC74 devices contain two independent D-type positive-edge-triggered flip-flops. A low level at the preset (PRE) or clear (CLR) inputs sets or resets the outputs, regardless of the levels of the other inputs. W

Gate; Quadruple 2-Input Positive-OR Gates; 0 to 5 V; 500 ns

Manufacturer: Texas Instruments Description: Gate; Quadruple 2-Input Positive-OR Gates; 0 to 5 V; 500 ns (Max.) @ 4.5 V Wide operating voltage range of 2 V to 6 V Outputs can drive up to 10 LSTTL loads Low power consumption, 20- The ’HC32 devices contain four independent 2-input OR gates.

Gate, Bus Buffer; Quadruple Bus Buffer Gates with 3-state Ou

Manufacturer: Texas Instruments Description: Gate, Bus Buffer; Quadruple Bus Buffer Gates with 3-state Outputs; PDIP; -40 de Low power consumption, 80-μA max ICC ±6 mA output drive at 5 V Low input current of 1 μA max These quadruple bus buffer gates feature independent line drivers with 3-state outputs. Each output is disabled when the associated output-enable (OE) input is high. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Gate, AND; Quadruple 2 input positive AND Gate; 0 to 5 V; 50

Manufacturer: Texas Instruments Description: Gate, AND; Quadruple 2 input positive AND Gate; 0 to 5 V; 500 ns (Max.) @ 4.5 V Fully static operation Buffered inputs common reset Balanced propagation delay and

Transceiver; Octal Bus Transceiver; 0 to 5 V; 500 ns (MAx.)

Manufacturer: Texas Instruments Description: Transceiver; Octal Bus Transceiver; 0 to 5 V; 500 ns (MAx.) @ 4.5 V; PDIP-N Wide operating voltage range of 2 V to 6 V High-current 3-state outputs drive bus Lines directly or up To 15 LSTTL loads These Octal bus transceivers are designed for asynchronous two-way communication between data buses. The control-function implementation minimizes external timing requirements. The devices allow data transmission from the A bus to the B bus or from the B

Counter/Divider; CMOS; 4.95 V (High), 0.05 V (Low); PDIP; -5

Manufacturer: Texas Instruments Description: Counter/Divider; CMOS; 4.95 V (High), 0.05 V (Low); PDIP; -55 degC; 125 degC Medium-speed operation Fully static operation Buffered inputs and outputs For control counters, timers, frequency dividers, and time-delay circuits applications 100% tested for quiescent current at 20 V. Standardized, symmetrical output characteristics. Common reset.

Counter; CMOS 8-Stage Presettable Synchronous Down Counter;

Manufacturer: Texas Instruments Description: Counter; CMOS 8-Stage Presettable Synchronous Down Counter; 18 V; -2.4 mA; 5 pF Synchronous or asynchronous preset Medium-spee operation Cascadable 100% tested for quiescent current at 20 V Maximum input current of 1 μA @ 18 V over full package-temperature range, 100 nA @ 18 V and 25 °C It is consist of an 8-stage synchronous down counter with a single output which is active when the internal count is zero. Each type has control inputs for enabling or disabling the clock, for clearing the counter to its maximum count, and for presetting the counter either synchronously or asynchronously.

Flip-flop, Octal D; Octal D Type Flip-flop with clear; 0 to

Manufacturer: Texas Instruments Description: Flip-flop, Octal D; Octal D Type Flip-flop with clear; 0 to 5 V; PDIP; -40 degC Outputs can drive up to 10 LSTTL loads ±4 mA output drive at 5 V Low input current of 1 These circuits are positive-edge-triggered D-type flip-flops with a direct clear input.

Positive-NOR-Gate, Triple 3-Input; CMOS; PDIP; 0 degC; 70 de

Manufacturer: Texas Instruments Description: Positive-NOR-Gate, Triple 3-Input; CMOS; PDIP; 0 degC; 70 degC Triple 3-input positive NOR Gate with PDIP package and 0 to +70 °C operating temperature.

Register, Parallel Load Shift; 8 Bit Parallel Load Shift Register; 0 to 5 V 735-1546

Manufacturer: Texas Instruments Description: Register, Parallel Load Shift; 8 Bit Parallel Load Shift Register; 0 to 5 V Outputs can drive up to 10 LSTTL loads ±4 mA output drive at 5 V Low input current of 1 The HC165 devices are 8-bit parallel-load shift registers that, when clocked, shift the data toward a serial output. Parallel-in access to each stage is provided by eight individual direct data inputs that are enabled by a low level at the shift

Counter, 8 Bit Binary; 8 Bit Binary Counter with 3 State Out

Manufacturer: Texas Instruments Description: Counter, 8 Bit Binary; 8 Bit Binary Counter with 3 State Output Registers; PDIP Outputs can drive up to 10 LSTTL loads ±6 mA output drive at 5 V Low input current of 1 The HC590A devices contain an 8-bit binary counter that feeds an 8-bit storage register. The storage register has parallel outputs. Separate clocks are provided for both the binary counter and storage register. The binary counter features direct clear and

Flip-Flop; Octal Edge-Triggered D-Type Flip-Flop; 0 to 5 V;

Manufacturer: Texas Instruments Description: Flip-Flop; Octal Edge-Triggered D-Type Flip-Flop; 0 to 5 V; PDIP-N; -40 degC Wide operating voltage range of 2 V to 6 V High-current 3-state outputs drive bus Lines directly or up To 15 LSTTL loads These Octal edge-triggered D-type flip-flops feature 3-state outputs designed specifically for bus driving. They are particularly suitable for implementing buffer registers, I⁄O ports, bidirectional bus drivers, and wor

Positive-NAND-Gate, Dual 4-Input; CMOS; PDIP; 0 degC; 70 deg

Manufacturer: Texas Instruments Description: Positive-NAND-Gate, Dual 4-Input; CMOS; PDIP; 0 degC; 70 degC These devices contain two independent 4-input NAND gates.

Decoder/Demultiplexer; Dual 2 to 4 Line Decoder-Demultiplexe

Manufacturer: Texas Instruments Description: Decoder/Demultiplexer; Dual 2 to 4 Line Decoder-Demultiplexer; 0 to 5 V; PDIP Outputs can drive up to 10 LSTTL loads ±4 mA output drive at 5 V Low input current of 1 The HC139 devices are designed for high-performance memory-decoding or data-routing applications requiring very short propagation delay times. In high performance memory systems, these decoders can minimize the effects of system decoding. When employed wi

Register, Shift; CMOS; 0 to 6 V (Max.); 500 ns (Max.) @ 4.5 V; PDIP; -40 degC 735-3617

Manufacturer: Texas Instruments Description: Register, Shift; CMOS; 0 to 6 V (Max.); 500 ns (Max.) @ 4.5 V; PDIP; -40 degC 8-bit serial-in, parallel-out shift Low input current of 1 μA Max Shift register has direct clear The devices contain an 8-bit serial-in, parallel-out shift register that feeds an 8-bit D-type storage register. The storage register has parallel 3-state outputs.Separate clocks are provided for both the shift and storage register. The shift register has a direct overriding clear (SRCLR) input, serial (SER) input, and serial outputs for cascading.

Flip-Flop, D-Type; F-TTL; -18 mA (Max.); PDIP-14; 0 degC; 70

Manufacturer: Texas Instruments Description: Flip-Flop, D-Type; F-TTL; -18 mA (Max.); PDIP-14; 0 degC; 70 degC These devices contain two independent positive edge-triggered D-type flip-flops. A low level at the preset (PRE) or clear (CLR) inputs sets or resets the outputs regardless of the levels of the other inputs. When PRE and CLR are inactive (high), data at t

Gate, NOR; Quadruple 2 input positive NOR Gate; PDIP; -40 de

Manufacturer: Texas Instruments Description: Gate, NOR; Quadruple 2 input positive NOR Gate; PDIP; -40 degC; 85 degC Outputs can drive up To 10 LSTTL loads Low power consumption, 20 μA max ICC Low input curren

IC; 5 V (Nom.); PDIP; 0 degC; 70 degC 735-2028

Manufacturer: Texas Instruments Description: IC; 5 V (Nom.); PDIP; 0 degC; 70 degC 0 to 70 °C operating temperature range 2 V (M") high level input voltage.

IC; OR; -1 mA (Max.) (High), 20 mA (Max.) (Low); PDIP; 0 deg

Manufacturer: Texas Instruments Description: IC; OR; -1 mA (Max.) (High), 20 mA (Max.) (Low); PDIP; 0 degC; 70 degC Medium-speed operation Fully static operation Buffered inputs and outputs For cont -18 mA (max.) input clamp current.

[1] · 2 · 3 · 4 · 5 · 6 ·

sector pages

Category