sector pages

Manufacturer: Texas Instruments Description: Amplifier; Quadruple Operational; + 16/+ 32 V; 1.4 mA (Typ.) @ 0.5 VCC; + 32 V Internal frequency compensation These devices consist of four independent high-gain frequency-compensated operational amplifiers that are designed specifically to operate from a single supply over a wide range of voltages. The low supply-current drain is independent of the magnitude of the supply voltage.

Manufacturer: Texas Instruments Description: Amplifier; Low Noise JFET Input operational amplifier; + 18 V; 1.4 mA (Typ.) Low power consumption Wide common mode and differential voltage ranges Low input bias and offset currents The JFET-input Operational amplifiers in the TL07x series are similar to the TL08x series, with low input bias and offset currents and fast slew rate. The low harmonic distortion and low noise make the TL07x series ideally suited for high-fidelity and audio preamplifier applications. Each amplifier features JFET inputs (for high input impedance) coupled with bipolar output stages integrated on a single monolithic chip.

Manufacturer: Texas Instruments Description: Amplifier, Dual Operational; Operational; + 16/+ 32 V; 0.7 mA (Typ.) @ 2.5 V Internal frequency compensation These devices consist of two independent, frequency-compensated operational amplifiers designed to operate from a single supply over a wide range of voltages. The low supply-current drain. Applications include transducer amplifiers, dc amplification blocks, and all the conventional operational amplifier circuits that now can be implemented more easily in single-supply-voltage systems.

Manufacturer: Texas Instruments Description: Amplifier; Operational; + 16/+ 32 V; 0.7 mA (Typ.) @ 2.5 V; +32 V; 3 mV @ 25 de Internal frequency compensation Common mode input voltage range includes ground, allowing direct sensing near ground These devices consist of four independent high-gain frequency-compensated operational amplifiers that are designed specifically to operate from a single supply over a wide range of voltages. The low supply-current drain is independent of the magnitude of the supply voltage

Manufacturer: Texas Instruments Description: Amplifier; operational amplifier; + 18 V; 1.7 mA (Typ.); + 15 V; 1 mV (Typ.) Short circuit protection Offset voltage null capability Large common mode and differential voltage ranges No frequency compensation required Low power consumption No latch up The mA741 is a general-purpose Operational amplifier featuring offset-voltage null capability. The high common-mode input voltage range and the absence of latch-up make the amplifier ideal for voltage-follower applications. The device is short-circuit protected and the internal frequency compensation ensures stability withoutt external components. A low value potentiometer may be connected between the offset null inputs to null out the offset voltage.

Manufacturer: Texas Instruments Description: Amplifier; JFET-Input Operational; +18 V; 1.4 mA (Typ.); +30 V; 3 mV (Typ.) Low power consumption Wide common mode and differential voltage ranges Low input bias and offset currents Common mode input voltage range The TL08x JFET-input Operational amplifier family is designed to offer a wider selection than any previously developed Operational amplifier family. Each of these JFET-input Operational amplifiers incorporates well-matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit. The devices feature high slew rates, low input bias and offset currents, and low offset-voltage temperature coefficient.

Manufacturer: Texas Instruments Description: Amplifier; Quadruple Operational; + 4 V (Min.); 2.4 mA (Typ.) @ 25 degC, + 15 V Class AB output stage Input⁄output overload protection Designed to be interchangeable with industry standard It is internally compensated operational amplifiers designed to have operating characteristics similar to the μA741. These amplifiers exhibit low supply-current drain that are much less than those of the μA741.

Manufacturer: Texas Instruments Description: Amplifier; Quad Operational; + 3.5 V (Min.); 8 mA (Typ.) @ + 15 V; + 30 V; PDIP Low total harmonic distortion It is high-speed, JFET-input operational amplifiers. In addition, their matched high-voltage. It can be used in applications such as high-speed integrators, digital-to-analog converters, sample-and-hold circuits, and many other circuits.

Manufacturer: Texas Instruments Description: Amplifier; Quadruple Norton Operational; 6.2 mA (Typ.) @ 25 degC, 15 V; PDIP Internal frequency compensation Wide bandwidth Output short circuit protection It is designed specifically to operate from a single supply over a wide range of voltages. Operation from split supplies is also possible. The low supply current drain is essentially independent of the magnitude of the supply voltage. These devices provide wide bandwidth.

Manufacturer: Texas Instruments Description: Amplifier; General Purpose; 18 V; 3.4 mA (Typ.); 15 V/mV (Min.); 1 mV (Typ.) Short-circuit protection Wide common-mode and differential voltage ranges No frequency compensation required Low power consumption No latch-up Designed to be interchangeable with Motorola MC1558⁄MC1458 and signetics S5558⁄N5558 The MC1458 is a dual general-purpose Operational amplifier, with each half electrically similar to the μA741, except that offset null capability is not provided. The high-common-mode input voltage range and the absence of latch-up make these amplifiers ideal for voltage-follower applications. The devices are short-circuit protected and the internal frequency compensation ensures stability withoutt external components.

Manufacturer: Texas Instruments Description: Amplifier; Operational; +18 VDC; +36 VDC; +100 muV (Typ.); +0.5 pA; +0.8 pA High open loop gain of 120 dB minimum The device is a precision monolithic dielectrically isolated FET operational amplifier. Outstanding performance characteristics allow its use in the most critical instrumentation applications. Laser trimming of thin-film resistors gives very low offset and drift. Extremely low noise is achieved with patented circuit design techniques. A new cascode design allows high precision input specifications and reduced susceptibility to flicker noise.

Manufacturer: Texas Instruments Description: Amplifier; Dual Operational; 16 or 32; 1 mA; 32 V; 3 mV (Typ.) @ 25 degC

Manufacturer: Texas Instruments Description: Amplifier, Operational; JFET Input Operational; + 18 V; 1.4 mA (Typ.); + 30 V Low power consumption Wide common mode and differential voltage ranges Low input bias and offset currents Common mode input voltage range The TL08x JFET input Operational amplifier family is designed to offer a wider selection than any previously developed Operational amplifier family. Each of these JFET-input Operational amplifiers incorporates well matched, high voltage JFET and bipolar transistors in a monolithic integrated circuit. The devices feature high slew rates, low input bias and offset currents, and low offset-voltage temperature coefficient.

Manufacturer: Texas Instruments Description: Amplifier; Low Noise JFET Input Operational; + 18 V; 1.4 mA (Typ.); + 30 V Low power consumption Wide common mode and differential voltage ranges Low input bias and offset currents Common mode input voltage range The JFET input Operational amplifiers in the TL07x series are similar to the TL08x series, with low input bias and offset currents and fast slew rate. The low harmonic distortion and low noise make the TL07x series ideally suited for high-fidelity and audio preamplifier applications. Each amplifier features JFET inputs coupled with bipolar output stages integrated on a single monolithic chip.

Manufacturer: Texas Instruments Description: Amplifier; Dual Operational; + 3.5 V (Min.); 3.6 mA (Typ.); + 30 V; PDIP; 0 deg Internally trimmed offset voltage This device is a low-cost, high-speed, JFET-input operational amplifier with very low input offset voltage. It requires low supply current yet maintains a large gain-bandwidth product and a fast slew rate. In addition, the matched high-voltage JFET input provides very low input bias and offset currents. The device can be used in applications such as high-speed integrators, digital-to-analog converters, sample-and-hold circuits, and many other circuits.

Manufacturer: Texas Instruments Description: Amplifier; General Purpose; 18 V; 2.8 mA (Typ.); 200 V/mV (Typ.); 2 mV (Typ.) Wide range of supply voltages, single supply . . . 3 V to 36 V or dual supplies Class AB output stage True differential input stage Low input bias current Internal frequency compensation Short-circuit protection Designed to be interchangeable with The MC3403 is a quadruple Operational amplifiers similar in performance to the μA741, but with several distinct advantages. They are designed to operate from a single supply over a range of voltages from 3 V to 36 V. Operation from split supplies also is possible, provided the difference between the two supplies is 3 V to 36 V. The common-mode input range includes the negative supply.

Manufacturer: Texas Instruments Description: Amplifier; Operational; + 4.5 V (Min.); 6.2 mA (Typ.); 30 nA (Typ.) @ 25 degC Output short-circuit protection Internal frequency compensation These devices consist of four independent, high gain frequency-compensated Norton operational amplifiers that were designed specifically to operate from a single supply over a wide range of voltages. Operation from split supplies is also possible. The low supply current drain is essentially independent of the magnitude of the supply voltage. These devices provide wide bandwidth and large output voltage swing.

Manufacturer: Texas Instruments Description: Amplifier; JFET-Input Operational; + 18 V; 1.4 mA (Typ.); + 30 V; 86 dB; SOIC Low power consumption Wide common mode and differential voltage ranges Low input bias and offset currents Output short circuit protection The TL08x JFET-input Operational amplifier family is designed to offer a wider selection than any previously developed Operational amplifier family. Each of these JFET-input Operational amplifiers incorporates well-matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit. The devices feature high slew rates, low input bias and offset currents, and low offset-voltage temperature coefficient.

Manufacturer: Texas Instruments Description: Amplifier; Low Power JFET Input operational amplifier; + 18 V; 200 muA (Typ.) Low power consumption Wide common mode and differential voltage ranges Low input bias and offset currents Common mode input voltage range The JFET input Operational amplifiers of the TL06_ series are designed as low-power versions of the TL08 series amplifiers. They feature high input impedance, wide bandwidth, high slew rate, and low input offset and input bias currents. The TL06 series features the same terminal assignments as the TL07_ and TL08_ series. Each of these JFET-input Operational amplifiers incorporates well-matched, high-voltage JFET and bipolar transistors in an integrated circuit.

Manufacturer: Texas Instruments Description: Amplifier; Low Power JFET Input operational amplifier; + 18 V; 200 muA (Typ.) Very low power consumption Wide common mode and differential voltage ranges Low input bias and offset currents Common mode input voltage range The JFET input Operational amplifiers of the TL06 series are designed as low-power versions of the TL08 series amplifiers. They feature high input impedance, wide bandwidth, high slew rate, and low input offset and input bias currents. The TL06_ series features the same terminal assignments as the TL07_ and TL08_ series. Each of these JFET-input Operational amplifiers incorporates well-matched, high-voltage JFET and bipolar transistors in an integrated circuit.

Manufacturer: Texas Instruments Description: Amplifier; JFET Input Operational; + 18 V; 1.4 mA (Typ.); + 30 V; 3 mV (Typ.) Low power consumption Wide common mode and differential voltage ranges Low input bias and offset currents Common mode input voltage range The TL08x JFET-input Operational amplifier family is designed to offer a wider selection than any previously developed Operational amplifier family. Each of these JFET-input Operational amplifiers incorporates well-matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit. The devices feature high slew rates, low input bias and offset currents, and low offset-voltage temperature coefficient.